SB-Series

SB-Series 3 Axes CNC Servo Motor Driven

==Mechanical Drawings==

==Technical Specifications==

Model NO.		Dry Cycle (sec)		Stroke(mm)					Max. Payload (kgs)		Net Weight (kgs)	Operating. Air Pressure
		Dry Cycle (sec)		Crosswise		Vertical		Traverse	Max. Payload (kgs)
		Take-Out	Cycle	Main	Sub	Main	Sub	Traverse	Main	Sub
SB800	Single-stage & Single-Arm	1,2	9	566	-	800	-	1525	8	-	230	5 kg/cm ²
SB800S	Single-stage & Double-Arm			463	100	800	850			3	240
SB800D	Telescopic & Single-Arm			537	-	800	-			-	250
SB800DS	Telescopic & Double-Arm			404	100	800	850			3	260
SB1000	Single-stage & Single-Arm	1,3	10	686	-	900	-	1765	8	-	235
SB1000S	Single-stage & Double-Arm			583	100	900	950			3	245
SB1000D	Telescopic & Single-Arm			657	-	900	-			-	260
SB1000DS	Telescopic & Double-Arm			487	100	900	950			3	270
SB1200	Single-stage & Single-Arm	1,4	11	686	-	1200	-	2005	8	-	240
SB1200D	Telescopic & Single-Arm			657	-	1200	-			-	265
SB1200DS	Telescopic & Double-Arm			487	100	1200	1250			3	280
SB1400	Single-stage & Single-Arm	1,6	12	686	-	1400	-	2005	8	-	290
SB1400D	Telescopic & Single-Arm	1,6	12	657	-	1400	-	2005	8	-	300

Power Source:AC 220V SINGLE PHASE

Positive servomotor drives with
rack and pinion gear
on vertical arm.

Hand-Held Controller :

One key one-function designs for clearly commanded.
Pulse generator can manually move the robot to designate location, save and easy for programming. Multi-language switches and conversational method guides the operator through out user-friendly operation.
Each teachable program can write up to 100 steps, each step can write 10 motion sequences together.
All speeds can be adjusted by the percentage rate.

Application :

14 spare input and 12 Spare output terminal for coordinate with other auxiliary equipments.
Parts Removal :
a) Reduce the difficulty and lower the cost to built End Of The Arm Tooling. b) Able to reach unconventional paths such as curves, hooks, undercut, exceptional route.
Stack and array :
In one cycle can handle up to 9 stack areas with individual stacking format. Otherwise can place 100 points on a same working surface.
Insert and grid :
In one cycle can pick 9 different insertion materials into the mold. It can be feed from a single point or grid pallet or multi-station.
Inspection :
a) Reject program: When detecting the reject signal from Injection Molding Machine, it can set the quantities and place on a different area. b) Inspection program: By setting the quality counter for Q/C purpose. For example to inspect the parts every 100 molding cycle once. c) Test-Mold program: By setting the test-mold counter, at the beginning of the automatic molding cycle can be checked. d) Weight program: Check the quality parts by electronic weight scale. It can separate the defects. e) Cycle counter: By setting the total molding cycle. It only counting the good parts, inspection and defects will not taken into total count.