| Application |
14 spare inputs and 12 spare outputs for interfacing with other ancillary equipment.
|
| 1.
Parts removal : |
|
a) 3 Axis synchronised movements reduce complexity and cost to build end-arm-tooling.
b) Able to reach parts with hooks and undercuts using unconventional paths such as curves, etc.
|
| 2.
Stack and array: |
|
Each cycle can handle up to 9 stack areas with individual stack formats. Can also place parts onto 100 points on the same surface.
|
| 3.Insert and grid: |
|
Each cycle can place 9 different insertion materials into the mould, fed from a single point, grid pallet, or multi-station.
|
| 4.
3D Path: |
|
The robot can follow teaching point-to point path to move. It lets the track move smoothly and shorten the cycle time.
|
| 5.
Inspection : |
|
a)
Reject program: Detects signal from the moulding machine, set the reject part count and places part in different area.
b)
Inspection program: Places part in different area for QC inspection, for example every 100 cycles.
c)
Test-Mold program: Allows checking of parts at the beginning of each automatic moulding cycle before cycle counter starts.
d)
Weight program: Checks part quality from electronic weigh scale and separates defect parts.
e)
Cycle counter:
Counts the total number of moulding cycles. If counting good parts only, inspection cycle and defect parts are not included in count total.
|
TOP
