SE-Series

==Technical Specifications==

Model NO.		Stroke (mm)					Max. Payload (kgs)		Net Weight (kgs)	Operating Air Pressure
		Crosswise(kick) ( N )		Vertical ( C )		Traverse ( I )	Max. Payload (kgs)
		Main	Sub	Main	Sub	Traverse ( I )	Main	Sub
SE700	Single-stage	451	-	700	-	2540	6	-	230	5 kg/cm²
SE900	Single-stage	571	-	900	-	3020	6	-	240
SE1200	Single-stage	691	-	1200	-	3500	6	-	250
SE700D	Telescopic	403	-	700	-	2540	6	-	280
SE900D	Telescopic	523	-	900	-	3020	6	-	290
SE1200D	Telescopic	643	-	1200	-	3500	6	-	295

Operation Voltage:AC 220V 3 phase

Hand-Held Pendent

One key one-function designs for clearly commanded. Pulse generator can manually move the robot to designate location, safe and easy for programming. Multi-language switches and conversational method guides the operator through out user-friendly operation.
Each teachable program can write up to 500 steps, each step can write 10 motion sequences together. All speeds can be adjusted by the percentage rate.

*Application*
14 spare input and output terminal for coordinate with other auxiliary equipments.
1. Parts removal :
a) Reduce the difficulty and lower the cost to built End Of The Arm Tooling. b) Able to reach unconventional paths such as curves, hooks, undercut, exceptional route.
2. Stack and array:
In one cycle can handle up to 9 stack areas with individual stacking format. Otherwise can place 100 points on a same working surface.
3. Insert and grid:
In one cycle can pick 9 different insertion materials into the mold. It can be feed from a single point or grid pallet or multi-station.
4. Inspection :
a) Reject program: When detecting the reject signal from Injection Molding Machine, it can set the quantities and place on a different area. b) Inspection program: By setting the quality counter for Q/C purpose. For example to inspect the parts every 100 molding cycle once. c) Test-Mold program: By setting the test-mold counter, at the beginning of the automatic molding cycle can be checked. d) Weight program: Check the quality parts by electronic weight scale. It can separate the defects. e) Cycle counter: By setting the total molding cycle. It only counting the good parts, inspection and defects will not taken into total count.


Wrist Rotation Device Unique designed wrist rotation device with air shut off pin. Excellent safety protection and easy to changed the End Of The Arm Tooling.	Optional Accessories End Of Arm Tooling accessories.	Optional Accessories Extra vacuum generator.	Optional Accessories Sprue Picker.